Industrial Gas Equipment

AG Gases can supply you with a wide range of GENTEC® Industrial Gas Products.

Compressed Gas Regulators

Gentec Industrial Gas Equipment
Image of 155 Series Single Stage Regulator
We can supply you with GENTEC® Compressed Gas Regulators including:
- CO2, High Flow Regulators
- Compact Pre-Set Regulators
- Flow Gauge Regulators
- Flowmeter Regulators
- High Pressure Piston Regulators
- Liquid Cylinder Regulators
- Manifold Regulators
- Pipeline Regulators
- Single Stage Regulators - Light Duty
- Single Stage Regulators - Medium Duty
- Single Stage Regulators - Medium to Heavy Duty
- Single Stage Regulators - Heavy Duty
- Single Stage Regulators - Extra Heavy Duty
- Station Regulators
- Two Stage Regulators - Medium Duty
- Two Stage Regulators - Heavy Duty
- Two Stage Regulators - Extra Heavy Duty

Contact us to find out more: sales@AGGases.com

Balloon Regulators & Accessories

Gentec Industrial Gas Equipment
Image of 230HBG Balloon Blower
We can supply you with GENTEC® Balloon Regulators and Accessories including:

Balloon Filler Regulators

- 229 Series "Economy Balloon Blower"
- 230 Series "BalloonBlower"
- 230HB Series "Balloon Blower"
- 230H Series "Balloon Blower"
- 230HGMYA Mylar Balloon Regulators

Balloon Filler Regulator Accessories:

- Replacement Parts: Contents Gauge, Tie Hook, String Cutter, Body Plugs
- Replacement Valves: Tilt Valves And/Or Blow Guns, Mylar Tips for Tilt Valves, Push Valves
- Replacement Tips: Latex Balloon Tips, Mylar Balloon Tips, Balloon Tip Attachments, Needle Valve Tips, Mixer Tips
Contact us to find out more: sales@AGGases.com

Arc Welding Accessories

Gentec Industrial Gas Equipment
Image of Ground Clamp
We can supply you with GENTEC® Arc Welding Accessories including:
- Cable Connectors
- Cable Lugs
- Cable Splicers & Rubber Sleeves
- Connector Terminal
- Electrode Holders
- Ground Clamps
- Machine Plugs
Contact us to find out more: sales@AGGases.com

CGA Adaptors & Valves

Gentec Industrial Gas Equipment
Image of "Y" Connector
GENTEC® Adapters & Valves are high quality brass, accurately machined to CGA specifications. All of the adapters and valves are interchangeable with those of all other manufacturers. Please note that adapters are not recommended on permanent installations. Regulators with the proper inlet connection should be used on all cylinders and systems.

- CGA Cylinder to Regulator Adapters
- Brass Shut-Off Valves
- Tee Couplers
- "Y" Connections
- Inert Arc Fittings
Contact us to find out more: sales@AGGases.com

CGA Regulators Inlet & Outlet Fittings

Gentec Industrial Gas Equipment
Image of CGA 580 Nipple

CGA Regulator Inlet Nuts & Nipples

GENTEC® Regulator Inlets, Outlet & Accessories are high quality brass, accurately machined to applicable CGA specifications. All inlet stems have a 45 micron sintered bronze filter installed and are interchangeable with all manufacturers' regulators that have 1/4" NPT port sizes.
- CGA 200 "MC" Tank
- CGA 300 "COMMERCIAL"
- CGA 510 "P.O.L."
- CGA 520 "B" Tank
- CGA 320
- CGA 540
- CGA 580

Regulator Outlet Brushings

GENTEC® Regulator Inlets, Outlet & Accessories are high quality brass, accurately machined to applicable CGA specifications. All inlet stems have a 45 micron sintered bronze filter installed and are interchangeable with all manufacturers' regulators that have 1/4" NPT port sizes.
- Outlet Bushings
- Regulator Accessories
Contact us to find out more: sales@AGGases.com

Check Valves

Gentec Industrial Gas Equipment
Image of Torch End Check Valve
GENTEC® Check Valves prevent reverse flow of gases which can cause dangerous mixtures. Choose from three styles to fit your needs; 24-CV5 Series attach to the torch with 3/8"-24 "A" fitting; 24-CV7 Series attach to the torch; 24-CV8 Series replace the standard "B" size outlet bushings on regulators; 24-CV9 Series attach to the current regulator outlet bushings( use in all "The Compact Torch" kits and "The Small Torch" Kits.)
Contact us to find out more: sales@AGGases.com

Welding & Cutting Apparatus

Gentec Industrial Gas Equipment
Image of 143CA Heavy Duty Cutting Attachment
GENTEC® Cutting Attachments are made from high quality die-forged brass. They are available in light, medium, and heavy duty models. Featuring tube mix design, Models 141C, 142C and 143CA can be used with Acetylene, Propane, MAPP®, Propylene, Fuel Gases, and Natural Gas (2 PSIG & above). 442C and 443C have three tubes in a triangular arrangement and feature a flat seat tip design and in head mixer.
- 141C Light Duty
- 142C Medium Duty
- 143CA Heavy Duty
- 442C Medium Duty
- 443C Heavy Duty


MAPP® is a registered trademark of Airco, Inc., VICTOR® is a registered trademarks of Victor Equipment Co., Corp., HARRIS® is a registered trademarks of Lincoln Electric Company, The Corporation, which are not associated with GENTEC or AGGases
Contact us to find out more: sales@AGGases.com

Cutting Tips

Gentec Industrial Gas Equipment
Image of Victor® Style Machine Torch High Speed Cutting Tip
GENTEC® Cutting Tips are precision machined from high quality copper alloys for durability. The gas passages for single piece acetylene tips are accurately swage-formed and shaped on polished mandrels for smooth, efficient gas flow. Two piece tips for alternate fuel gases feature an internal spline configuration that is of the latest design, offering the optimum in cutting performance. All tips are 100% flame tested.

We Supply:

- Victor Style Cutting Tips - Oxy-Acetylene
- Victor Style Cutting Tips - Oxy-Propane
- Victor Style Cutting Tips - Propylene/MAPP®
- Victor® Style Scarfing-Gouging Tips
- Victor ®Style Machine Torch High Speed Cutting Tips
- Harris® Style Cutting Tips
- Concoa®/Airco® Style Cutting Tips
- Koike®/Airco® Style Machine Torch High Speed Cutting Tips

Contact us to find out more: sales@AGGases.com

Flashback Arrestors

Gentec Industrial Gas Equipment
Image of Fit Torches
GENTEC Flashback Arrestors are specially designed to prevent personal injury and damage to equipment from the severe flashback. GENTEC Flashback Arrestors are available for regulators, torches and pipes.

- 9/16" - 18LH for Acetylene and Fuel gas models, 9/16"-18RH for Oxygen models
- Sintered Metal Flame Arresting Filter to quench the flame from severe flashback
- Built-in automatic reset Non-return Valve to prevent reverse flow of gases by temporarily cutting off the gasses
- FA10 and FA20 Series are equipped with Heat Sensitive Cut-Off Valve which automatically shuts off gas supply and cannot be reset
- FA23 Series is equipped with Pressure Sensitive Cut-Off Valve which automatically shuts off gas supply and can be manually reset, and Pressure Relief Valve which relieves excess pressure and fumes in the event of flashbackent from the severe flashback. GENTEC Flashback Arrestors are available for regulators, torches and pipes.
Contact us to find out more: sales@AGGases.com

Hand Cutting Torches

Gentec Industrial Gas Equipment
Image of 2463 Series Oxy-Acetylene Torch
GENTEC® Hand Cutting Torches are machined from high-quality forged brass. Model 161S, 162 and 163 Series feature tube mix design. 263 Series and Model 363S have inline tubes arrangement and can be used with any type fuel gases, such as acetylene, propane, natural gas, propylene and MAPP­, 2 PSIG and above. 463 Series has triangular tubes arrangement and are compatible to HARRIS­ model 62-3. 463 Series also has models available for oxy-acetylene, and oxy-propane cutting operations. Balanced design and rugged construction is ideal for medium or heavy duty cutting and scraping operations.
- 161S
- 162 and 163 Series
- 263 Series
- 363S
- 463 Series Oxy-Acetylene
- 463 Series Oxy-Fuel Gases
Contact us to find out more: sales@AGGases.com

Heating Nozzels

Gentec Industrial Gas Equipment
Image of 173H Model Oxy-Acetylene Heating Nozzel
We can supply you with GENTEC® Heating Nozzels including:
- Oxy-Acetylene & Oxy-Hydrogen Nozzles
- Oxy-Acetylene & Oxy-Hydrogen Elbows & Mixers
- Oxy-Propane & Oxy-Natural Gas Heating Nozzles
- Oxy-Acetylene Heating Nozzle
- All Fuel Gases Heating Nozzles
- Heating Elbows
- Heating Heads
- Mixers

Contact us to find out more: sales@AGGases.com

Hose Fittings, Ferrules & Braces

Gentec Industrial Gas Equipment
Image of 24-7326 model Brass Ferrule
We can supply you with GENTEC® Hose Fittings which are high quality brass, accurately machined to applicable CGA specifications. Ferrules and braces are stamped from brass. The part number is stamped on each ferrule and brace for easy identification.

We Supply:

- Brass Hose Nuts & Couplers
- Brass Hose Nipples
- Brass Hose Splicers
- Brass Ferrulres & Hose Braces
Contact us to find out more: sales@AGGases.com

Hose Repair Kit & Crimping Tools

Gentec Industrial Gas Equipment
Image of V-Grip Crimping Plier

Hose Repair Kits

GENTEC® Hose Repair Kits are designed and outfitted to allow timely hose repair in the shop or in the field. A tough polyethylene case holds the components: Hose nuts and nipples (A & B sizes), splicers, couplers and various size ferrules most commonly used on 3/6" and 1/4" hose. Kits are equipped with 2 types of tools (see below). A display card with the fitting numbers and the compartment location is on both the outside and inside of the case lid for added convenience in selecting and reordering.

Crimping Tools

GENTEC® Crimping Tools are ideal for ship and field repair of hoses. They are made of high alloy, nickel plated steel, with a one piece forged jaw for super strength.
Contact us to find out more: sales@AGGases.com

Machine Cutting Torches

Gentec Industrial Gas Equipment
Image of MC205 Series Machine Cutting Torch
We can supply you with GENTEC® Machine Cutting Torches which are designed to handle all applications of machine cutting. They are available in two-hose and three hose versions. They can be used with various fuel gases such as Acetylene, Propane, Natural Gas, Propylene and MAPP®.
We also supply Machine Torch Holders.
Contact us to find out more: sales@AGGases.com

Weed Burner Torch Kit

Gentec Industrial Gas Equipment
Image of Gentec Weed Burner
We can supply you with GENTEC® Weed Burner Torch Kits, designed for heavy-duty outdoor applications.

Details:

- Large volume of heat (up to 500,000 BTUs) for weed burning, ice melting, asphalt removal and any other applications
- For use with standard 20lb Bar-B-Que liquid propane tanks
- All steel torch handle and torch head
- Excess flow Safety Valve shuts off flow when hose is accidentally cut or melted
- 10' Durable Hose and Single-Flint Striker are included in the outfit
- Brass control knob will not freeze up in cold weather
- For use with propane only
Contact us to find out more: sales@AGGases.com

Pressure Gauges

Gentec Industrial Gas Equipment
Image of Steel Case Dual Scale Gauge
GENTEC® Pressure Gauges are designed to handle all applications of machine cutting. GENTEC Gauges are manufactured to strict quality standards and provide accuracy & reliability for use in O.E.M. and replacement applications. GENTEC Brass Gauges offer you the option of Single Scale (PSI), or Dual Scale (PSI & kPa) to fulfill a much wider range of applications.

GENTEC® High Pressure Gauges, 1000 PSI and above, have a "blow out" back design for safety and are listed by Underwriters Laboratories Inc. This is your assurance of safety, quality & reliability. U.L. listed gauges are indicated with an asterisk (*) in the "Scale Ranges" column of the chart below (two-hose and three-hose versions). They can be used with various fuel gases, such as Acetylene, Propane, Natural Gas, Propylene and MAPP®.

We supply:

- 1-1/2" Steel Case Dual Scale
- 2" Steel Case Dual Scale
- 2" Brass Case Dual Scale
- 2" Brass Case Single Scale
- 2-1/2" Brass Case Dual Scale
- 2-1/2" Brass Case Single Scale
- Replacement Plastic Lens
Contact us to find out more: sales@AGGases.com

Quick Connectors

Gentec Industrial Gas Equipment
Image of Hose to Torch Quick Connector
GENTEC® Quick Connectors with built-in check valves enables fast, reliable, safe, easy connection and disconnection of hoses, torches and regulators. These connectors provide improved productivity in many applications, such as welding, cutting, and brazing. They are made from high-grade materials under stringent quality control that assures dimensional accuracy and precise fitting of every connection.

We supply:

- Regulator to Hose
- Hose to Hose
- Hose to Torch

Contact us to find out more: sales@AGGases.com

GENTEC® Small Torch Kits & Components

Gentec Industrial Gas Equipment
Image of Oxy-Acetylene Fuel Kit
GENTEC® Small Torch™ Kits feature:
- Lightweight durable construction with chrome-plated solid brass body and stainless steel inner gas tubes
- Easy manipulation in very tight spaces
- Provides a stable and precise concentrated feather flame up to 6000° F
- Designed to braze and solder the smallest of materials
- Melt up to 3 oz of silver and weld up to 5/32" thick steel
- Air-Acetylene, Oxy-Acetylene and Oxy-Fuel Kits
- Oxy-Fuel Kit (KSTP14-TSP) available for use with disposable oxygen and 1 lb Propane/MAPP® gas cylinders
- Durable and Flexible hoses with "B" connections.( "A" connection adapters available)

We also Supply Individual Components:
- Torch Handles
- Air-Acetylene Tips
- Oxy-Acetylene/Oxy-Fuel Tips
- Replacement Hoses
- Regulators

Contact us to find out more: sales@AGGases.com

Torch Handles & Gas Savers

Gentec Industrial Gas Equipment
Image of 143T Model Heavy Duty Torch Handle

Torch Handles

GENTEC® Torch Handles are available in light, medium, and heavy duty models. Torch handles are machined from high-quality forged brass. Threaded construction facilitates easy repairs and servicing.
140T, 141T, 141TA, 142T and 143T Series feature Tube-in-a-Tube design within the torch handle.
442T and 443T feature two tubes within the torch handles.

Gas Savers

Double Shutoff Valves with Pilot Flame are designed for quick shut-off and easy restart of the working flame during gas welding and cutting operation. The working flame is automatically extinguished and the gas flow discontinued by placing the torch handle on the convenient hook. To reignite the working flame, lift the torch handle from the hook and place the tip close to the pilot flame. Our Duel Shutoff Valves Assembly is convenient, safe and fuel-efficient.

Gas Saver Torch Handles

GENTEC® Gas Saver Lever On/Off Torch Handles are designed for brazing where precise gas control is required. The lever is for immediate On/Off control of the oxygen and fuel gas. The pilot adjustment is to allow the user to keep a small pilot flame on the end of the tip for immediate acceleration of the flame on the brazing tip.

Contact us to find out more: sales@AGGases.com

Welding Accessories

Gentec Industrial Gas Equipment
Image of Cup Welding Goggles
We can supply you with GENTEC® Welding Accessories including:
- Brushes
- Chipping Hammers
- Clamps
- Cylinder Wrenches
- Files
- Gas Savers
- Googles
- Magnetic Holders
- MIG Reamer
- Strikers
- Tip Cleaners
- Tip Drills
- Tip Refacing Tool
- Twin Welding Hoses
Contact us to find out more: sales@AGGases.com

Welding & Cutting Outfits

Gentec Industrial Gas Equipment
Image of 1130 Commander Welding Kit
We can supply you with GENTEC® Welding and Cutting Outfits.
These outfits suit a wide range of uses including general maintenance work, metal sculpture, automotive repair, etc.
All Outfits come with Torch End Check Valves. Acetylene Regulator Inlet supplied as standard is CGA 510, Acetylene Inlet CGA 300 is also available.

Gold Series

- 1120 JOBBER
- 1121 JOBBER II
- 1130 COMMANDER
- COMMANDER II
- 1131 IRON HORSE II
- 1221 IRON HORSE II PLUS
- 1221H EXCALIBUR
- 12PTC TOTE A TORCH

Silver Series

- 7120 - Medium Duty for General Purpose
- 7130 - Heavy Duty for General Purpose
- 72PT - Light/Medium Duty for Repair, Maintenance & HVAC

Contact us to find out more: sales@AGGases.com

Welding Nozzles & Replacement Tip Ends

Gentec Industrial Gas Equipment
Image of 173WRTE Welding Nozzle
We can supply you with GENTEC® Welding Nozzels, and replacement tip ends in a wide variety of thicknesses and sizes, for Light, Medium and Heavy duty use.

Welding Nozzles

- Oxy-Acetylene & Oxy-Hydrogen Welding Nozzles
- Oxy-Acetylene & Oxy-Hydrogen Elbows
- Oxy-Acetylene & Oxy-Hydrogen Mixers
- Oxy-Propane & Oxy-Natural Welding Nozzles
- Multi-Gas Welding Nozzles

Welding Nozzle Replacement Tip Ends

- Oxy-Acetylene Welding Elbows
- Oxy-Acetylene Welding Mixers
- Oxy-Acetylene Replacement Tip Ends
- Oxy-Propane, Oxy-Natural Gas Replacement Tip Ends
Contact us to find out more: sales@AGGases.com